• Search for:
    8Jan, 2026
    Different Types of Mill Linings
    Mill linings are critical components in grinding equipment (ball mills, SAG mills, rod mills, vertical mills). They serve two key roles: protecting the mill cylinder from abrasion and impact, and boosting grinding efficiency by guiding the movement of grinding media and materials. Different mill lining types are engineered with specific materials and structures to fit diverse grinding scenarios, material properties, and mill designs.
    Understanding the core traits of each mill lining type helps you choose the best solution. This extends mill life, cuts maintenance costs, and maximizes grinding output.

    1. High-Manganese Steel Mill Linings

    High-manganese steel mill linings are a traditional, widely used option. Their key advantages are exceptional impact toughness and work-hardening properties, making them perfect for high-impact grinding environments.
    • Core Material: High-manganese steel (11%-14% Mn) with low carbon content (0.9%-1.2%) for enhanced toughness.
    • Key Features: Initial hardness of HB200-250; surface hardness jumps to HB500+ after work hardening from grinding media impact. Impact toughness ≥200J/cm², preventing brittle fracture.
    • Performance Highlights: Self-sharpening during operation; strong resistance to heavy material collisions. Easy to cast into complex shapes for different mill structures.
    • Typical Applications: SAG mills (semi-autogenous grinding) for primary ore grinding; ball mills handling large, hard ore chunks. Ideal for high-impact, low-to-medium abrasion scenarios.

    2. High-Chromium Alloy Mill Linings

    High-chromium alloy mill linings are premium choices for high-abrasion grinding. They prioritize superior wear resistance to reduce replacement frequency.
    • Core Material: High-chromium cast iron (15%-28% Cr) blended with carbon, molybdenum, and nickel. This forms hard M7C3 carbides.
    • Key Features: Surface hardness HRC60-68, 3-5 times more wear-resistant than high-manganese steel. Low wear rate (≤0.3kg/t material) and good corrosion resistance to mineral slurries.
    • Performance Highlights: Maintains structural integrity during long-term abrasive grinding; minimizes material loss. Smooth surface design reduces energy consumption, improving grinding efficiency.
    • Typical Applications: Ball mills for fine grinding of abrasive ores (iron ore, copper ore); vertical mills for cement clinker grinding. Suitable for high-abrasion, low-impact scenarios.

    3. Composite/Bimetallic Mill Linings

    Composite (bimetallic) mill linings combine the benefits of high wear resistance and toughness. This bimetallic technology offers a cost-effective balance between performance and budget.
    • Core Structure: Wear layer (high-chromium alloy, 15-30mm thick) + base layer (carbon steel/alloy steel). Bonded via composite casting with bonding strength ≥300MPa.
    • Key Features: Wear layer provides high abrasion resistance (HRC62-66); base layer ensures structural toughness (tensile strength ≥600MPa) and anti-deformation. Saves 30%-50% compared to full high-chromium linings.
    • Performance Highlights: Avoids the “hard but brittle” issue of full high-chromium linings and rapid wear of high-manganese steel. Excels in mixed wear (abrasion + impact) scenarios.
    • Typical Applications: Medium-sized ball mills for ore beneficiation; first/second chambers of cement mills. Ideal for plants seeking cost-performance balance.

    4. Rubber Mill Linings

    Rubber mill linings are specialized for energy-saving, noise-reducing, and low-abrasion grinding. They focus on protecting the mill cylinder while optimizing grinding efficiency.
    • Core Structure: Metal backing plate + rubber layer (natural rubber/NBR, 20-50mm thick). Equipped with anti-slip grooves and bolted fixing for secure installation.
    • Key Features: Low hardness (Shore A 65-80) with excellent shock absorption. Reduces operating noise by 15-25dB. 30% lighter than steel linings, cutting mill energy consumption by 8%-12%.
    • Performance Highlights: Prevents grinding media adhesion and material buildup; reduces mill cylinder wear. Easy to replace and maintain, minimizing downtime.
    • Typical Applications: Ball mills for fine grinding of gypsum, coal, and biomass; small-scale ore grinding mills; auxiliary grinding systems needing noise reduction.

    5. Wave/Classifying Mill Linings

    Wave or classifying mill linings are structural-specific types. They’re designed to optimize the movement of grinding media and materials, boosting grinding efficiency and product quality.
    • Core Material: Usually high-manganese steel or composite alloy (matched to wear conditions). Features a wave-shaped or grooved surface structure.
    • Key Features: Wave/groove design increases grinding media lifting height and cascading impact. Promotes material classification, reducing over-grinding and improving product uniformity.
    • Performance Highlights: Boosts grinding efficiency by 15%-20%; reduces energy consumption per ton of material. Ensures uniform wear of both grinding media and linings.
    • Typical Applications: Large-scale ball mills for full-process ore grinding; second chambers of cement mills. Suitable for high-efficiency grinding systems.

    6. Key Selection Criteria for Mill Linings

    To choose the right mill lining, match its features to your specific grinding conditions:
    • Material Abrasiveness: High-abrasive (hard ore, clinker) → high-chromium alloy/composite linings; Low-abrasive (coal, gypsum) → rubber linings.
    • Mill Type: SAG mill (high impact) → high-manganese steel; Ball mill (fine grinding) → high-chromium/composite; Vertical mill → high-chromium; Energy-saving needs → rubber linings.
    • Grinding Requirements: High efficiency & classification → wave/classifying linings; Cost-sensitive → composite/high-manganese steel; Noise reduction → rubber linings.
    • Operating Environment: Humid/corrosive → high-chromium/rubber linings; High-temperature → high-chromium/composite linings.

    7. Maintenance Tips to Extend Mill Lining Service Life

    Proper maintenance greatly improves mill lining performance and service life. Follow these tips:
    • Regular Inspection: Check lining tightness, wear status, and bolt integrity weekly. Replace loose bolts or worn linings promptly to avoid secondary damage to the mill cylinder.
    • Uniform Feeding: Keep material particle size and feeding amount consistent. This prevents uneven lining wear and abnormal stress.
    • Grinding Media Management: Choose the right grinding media size and filling rate. This reduces unnecessary impact and friction on linings.
    • Cleaning & Protection: Regularly remove material residues and mineral slurries from lining surfaces. Store spare linings in dry, ventilated areas to prevent rust and deformation.

    Why Tailored Mill Linings Matter for Your Operation

    Mismatched mill linings cause frequent replacements, low grinding efficiency, high energy consumption, and increased operational costs. Tailored mill linings—designed for your specific mill model and grinding conditions—protect the mill cylinder optimally, improve grinding performance, and maximize your grinding equipment investment return.
    Need help selecting the right mill lining for your ball mill, SAG mill, or vertical mill? Share your mill model, grinding material, and operating conditions for a free customized recommendation!

    Read More

    24Aug, 2021
    Mill Liners for SAG Mills And AG Mills

    Mill Liners for SAG Mills

    Application: AG mill, SAG mill
    Dimensions: AS2074 L/2B, Cr5Mo
    Hardness: HRC33~42 (HB310~390)
    Casting Soundness: Level 2 of AS2574 or equivalent standerd
    MOQ: Negotiable
    Price: Negotiable
    Packaging Details: Standard packing
    Delivery Time: 7-30 days
    Payment Terms: T/T, Western Union, MoneyGram, paypal
    Supply Ability: 25000 Tons per Year
    Certification: CE、ROHS、 FCC,UL ,SGS

    Mill Liners Mill Liners

    Mill Liner Description:

    a.The hardness for Pearlitic CrMo Cast Steel Liners: HRc33~42 (HB310~390).
    b. Microstructure: Pearlite.
    c. Chemical Composition:Every melt is analysed by Spectrometer.
    d. Dimensional Checking & Gauging:100% check as per drawings.
    1. By visual inspection.
    2. By gauges check.
    e. Casting Soundness: Checked by UT test as per international standard.
    f. Surface Finish: Visual inspection after shot blasting: To achieve an acceptable level of surface texture, freedom from defects.
    g. Reporting: Providing chemical, dimensional and hardness reports.

    Mill Liners Mill Liners

    Mill Liner Feature:

    1.The Sag Mill Liners can be used in SAG mills and AG mills;
    2.The steel castings have higher reliability in large mills.
    China mill liner supplier provides ball mill liner services to worldwide ball mill liners customer.
    Hope you find our mill liner process and grinding mill liners product description helpful.

    Q&A:

    Q: Do you provide free samples?
    A: Yes, usually we provide free samples for testing under the condition of freight paid by customer.

    Q: What is the Warranty for our products ?
    A: If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.

    Q: What is the delivery time of your products?
    A: It depends on the inventory availability. If items needed are in stock, the delivery time would be within 7 work days, but if not the delivery time would be around 30 work days.

    Q: Can you manufacture Special-shaped products?
    A: Yes, we can.
    We can produce both standard and special prosucts.
    Our can make them according to your drawings and samples.
    We will send working schedule of your order each week.

    Our will inspect and test all merchandise in case of damaging and missing parts before shipment.
    The detailed inspection pictures of the order will be sent to you for your confirmation before delivery.

    If you have interest,please do not hesitate to contact me.
    Pls send the drawing,technical requirements to us by email.
    Looking forward to receiving your inquiry and reply.
    Thank you.

     

    Eternal Bliss Alloy Casting & Forging Co, Ltd.

    Caesar

    E-mail: sales@ebcastworld.com

    What’s app: 0086-130 930 23772

    www.ebcastworld.com

    Read More

    24May, 2021
    Wear Parts of Mill

    Wear Parts of Mill

    Specializing in the production of ball mill liner plate. We major supply crusher wear parts from 5kgs to 10000kgs. The Wear Parts of Mill a huge role in the wear industry now, it is very helpful for us to improve work efficiency and skill level.
    Hardness: more than HRC60
    Microstructure: Fine Martensite + Carbide + retained Austenite(≤6%)
    Mine Mill Liners It includes two parts, high wear resistance boltless plates and highly expandable riveting plates, which are self-fastened and strengthened to withstand impact from mill balls.
    The Mine Mill Liners Plates are cleaned, sandblasted with a nice surface without any obvious visual defects that can avoid the normal working of the castings.

    The general advantages in Wear Parts of Mill are as follows:

    In the last 20 years, our liners have been widely used in large, medium and small ball mills and ultrafine crushing equipment in China’s power generation, mining, cement, chemical engineering and metallurgical industries.

    Wear Parts of Mill Wear Parts of Mill
    Chrome Molybdenum Steel Wear Parts of Mill Chemistry Standard:
    Standard Specification for Cr-Mo Alloy Steel:
    Reference Standard      Nominal Chemical Composition (W%)
    C Si Mn P S Ni Cr Mo
    AS 2074/L2A 0.45-0.55 ≤0.75 0.50-1.00 ≤0.04 ≤0.04 – 0.80-1.20 –
    AS 2074/L2B 0.55-0.65 ≤0.75 0.50-1.00 ≤0.04 ≤0.04 – 0.80-1.50 0.2-0.4
    AS 2074/L2C 0.70-0.90 ≤0.75 0.50-1.20 ≤0.04 ≤0.04 – 1.30-2.40 0.2-0.4
    ZG42Cr2Si2MnMo 0.38-0.48 1.5-1.8 0.8-1.2 ≤0.04 ≤0.04 – 1.8-2.2 0.2-0.6
    ZG45Cr2Mo 0.40-0.48 0.8-1.2 0.4-1.0 ≤0.04 ≤0.04 ≤0.5 1.7-2.0 0.8-1.2
    ZG30Cr5Mo 0.25-0.35 0.4-1.0 0.5-1.2 ≤0.04 ≤0.04 ≤0.5 4.0-6.0 0.2-0.8
    ZG40Cr5Mo(FED-4A) 0.35-0.45 0.4-1.0 0.5-1.2 ≤0.04 ≤0.04 ≤0.5 4.0-6.0 0.2-0.8
    ZG50Cr5Mo 0.45-0.55 0.4-1.0 0.5-1.2 ≤0.04 ≤0.04 ≤0.5 4.0-6.0 0.2-0.8
    ZG60Cr5Mo 0.55-0.65 0.4-1.0 0.5-1.2 ≤0.04 ≤0.04 ≤0.5 4.0-6.0 0.2-0.8
    FMU-29 0.25-0.45 0.3-1.0 0.6-1.5 ≤0.04 ≤0.04 – 6.0-8.0 0.2-0.4
    FMU-11 0.90-1.30 0.3-1.0 0.6-1.5 ≤0.04 ≤0.04 – 11.0-13.0 0.3-0.5
    FMU-13 0.80-1.30 0.4-1.2 0.8-1.5 ≤0.04 ≤0.04 – 11.0-13.0 0.4-0.8
    FMU-14 1.60-2.00 0.4-1.2 0.8-1.5 ≤0.04 ≤0.04 – 11.0-13.0 0.6-1.0
    Wear Parts of Mill Wear Parts of Mill
    Double-Media Quenching Chromium-Molybdenum Alloy Steel Series
    • We specially design the material for Wear Parts of Mill in mines, coal-fired power plants and cement plants,etc.
    • With our special double media quenching process, the material can not only achieve ideal hardness (HRC48~55) but also ideal toughness value (AK30~100J).
    • It can completely meet the requirement of liners of large and middle size ball mills at home and abroad.
    • The match of Middle Chrome Liners and High Chrome Cast Balls has been the typical model in coal mills and cement mills.
    • Meanwhile, the material is applicable to the teeth plates, armored plates and hammers of crushers and excavator, bucket teeth.
    Pearlitic Chromium-Molybdenum Alloy Steel Series
    • The Pearlitic Chromium Molybdenum Alloy Steel Wear Parts of Mill are widely used in AG Mill,SAG Mill and Ball Mills.
    • Hardness: HB310-375 (equivalent to HRC33-42)
    • Impact resistant Value: Ak≥60J (60×10×10mm) in normal ambient temperature.
    • We can produce pearlitic Cr-Mo steel as per AS2074 Gr. L / 2B.
    Wear Parts of Mill Wear Parts of Mill Wear Parts of Mill
    High Chrome White Iron Series
    • High Chrome white iron we can produce include 15%Cr, 18%Cr, 20%Cr and 26%Cr.
    • Under same working condition,the wear performance of High Chrome mill liners is four times of that of high manganese steel liners and twice of that of low Chrome alloy steel liners.
    • Meanwhile, we can produce high Chrome castings as per AS2027, ASTM A532 and BS4844.
    Customer-made Mill Lining
    • In addition to our patented Boltless Mill Liners, we can produce liners as per the request of customers.
    • So far, we have been the regular suppliers of mill liners Now, we have supplied steel caps inserted in rubber lifters for SAG mills and AG mills to some mines in Australia and New Zealand.
    Wear Parts of Mill Wear Parts of Mill
    Wear Parts for Crusher
    • Depending on the specific working conditions,all wear parts can be ordered as Manganese Steel, high Cr cast iron or Cr-Mo Alloy Steel.
    • Our foundry has complete melting, heat treatment and test equipments,such as mid-frequency induction electrical furnaces,quenching and tempering furnaces, blast shot,spectrometer,Rockwell and Brinell Hardness tester,impactor,UT tester and metallographic microscope.
    • We achieved the certificate of quality management system ISO.
    • We have been exporting castings to oversea

     

    Eternal Bliss Alloy Casting & Forging Co, Ltd.

    Caesar

    E-mail: sales@ebcastworld.com

    Our What’s app: 0086-130 930 23772

    www.ebcastworld.com

    Read More

    26Aug, 2020
    Mill Liners: Material Selection, Design, Wear Measurement and RFQ Guide

    Mill Liners: Material Selection, Design, Wear Measurement and RFQ Guide

    Mill liners protect the shell of ball, SAG, AG and rod mills, but protection is only one part of their job. Liner profile, spacing, material, fastening and wear condition influence charge motion, grinding-media trajectory, pulp flow, throughput, power draw, maintenance exposure and the risk of liner or bolt failure. A material with high laboratory hardness can still perform poorly when its profile, impact duty or installation system is wrong.

    This engineering guide is for mine and cement plant maintenance teams, process engineers and buyers. It explains how to define mill duty, compare metallic and non-metallic liner options, measure wear, diagnose failure and prepare a drawing-based RFQ. It does not replace the mill OEM’s design, site risk assessment, structural review or approved reline procedure. Final material, profile, thickness, fixing and replacement limit must be approved for the specific mill and operating envelope.

    Grinding mill liner castings arranged for profile and dimensional inspection
    Existing EB Castworld media-library image used as a mill-liner geometry reference. Original customer, project, heat and service provenance were not independently re-established.

    Start with the grinding duty, not a material name

    Metso describes a mill lining as a customized wear part and notes that lining type and design affect throughput and total grinding cost. Therefore, “high manganese,” “high chrome,” “rubber” or “Cr-Mo” is not a complete specification. The supplier needs the mill geometry, speed, charge, ore, operating history and the current liner drawing before proposing a route.

    Input Information to provide Why it changes the liner
    Mill and zone OEM/model, diameter, length, speed, shell/head/discharge position and rotation Charge trajectory, impact and attachment differ by mill and position.
    Feed and product F80/P80, ore type, hardness/abrasiveness, moisture, clay and tramp metal Changes abrasion, impact, packing and pulp-lifting demand.
    Charge Ball size distribution, filling, density and operating power Controls impact energy and sliding/rolling contact.
    Slurry Solids, pH, chlorides, temperature, density and flow Corrosion and erosion can interact with mechanical wear.
    Current performance Wear scans, mass loss, cracks, loose bolts, throughput and shutdown history Separates material, profile, fastening and operating causes.

    Functions of shell, head, grate and pulp-lifter liners

    Shell liners protect the cylindrical shell and lift the charge. Feed and discharge head liners protect end plates and influence material movement. Grates control discharge apertures, while pulp lifters move slurry from the grate chamber toward the trunnion. Trunnion and trommel liners have their own flow, fit and wear requirements. A complete RFQ identifies each zone rather than calling every component a “mill liner plate.”

    Profile is a process variable. Lifter height, face angle, pitch, number, wave shape, grate opening and pulp-lifter volume can change charge motion and discharge capacity. Copying a worn liner reproduces lost geometry. Use the approved new-liner drawing or a controlled reverse-engineering plan that restores original dimensions.

    Material families and their selection boundaries

    Material family Potential fit Main strength Critical limit
    Austenitic manganese steel Zones with sufficient impact and deformation to support work hardening Damage tolerance and work-hardening response Low-impact abrasion may not generate the intended hardened surface; chemistry alone does not prove performance.
    Cr-Mo alloy steel Large metallic liners requiring a controlled hardness-toughness balance Heat-treatable matrix and section-size flexibility Grade, heat treatment, section and impact duty must be connected; excessive hardness can increase fracture risk.
    High-chromium white cast iron Severe abrasion with limited impact, depending on geometry and support Hard chromium-rich carbides Carbide-bearing irons are less tolerant of bending, point loading and uncontrolled bolt stress.
    Ni-Hard white iron Abrasion-dominant liners and plates under a suitable duty Carbide/matrix wear system Exact grade, matrix, heat treatment and impact boundary must be specified.
    Rubber Selected lower-impact zones where elasticity, weight and corrosion behavior help Lower component mass and elastic response Temperature, chemicals, sharp feed, impact and aging control suitability.
    Composite or metal-rubber Applications that combine structural inserts with elastomer Can tailor mass, stiffness and wear by zone Bonding, insert retention, fire/spark work and repair rules require supplier-specific approval.

    ASTM A128/A128M covers austenitic manganese steel castings, while ASTM A532/A532M-10(2023) covers abrasion-resistant cast irons. Neither standard chooses the correct liner family for a mill. The purchase order must name the applicable grade, delivery condition, test basis and any purchaser-specific chemistry, hardness, impact or microstructure requirement.

    Chemistry, microstructure and heat treatment

    Chemical composition provides the alloy system; it does not fully describe the delivered liner. Carbon, manganese, chromium, molybdenum, nickel, silicon and residuals interact with section size, solidification and heat treatment. In white iron, carbide type, volume and distribution work with the matrix. In alloy steel, hardenability and tempering determine the hardness-toughness balance. In manganese steel, solution treatment and carbide control matter before service work hardening begins.

    Control What to specify Evidence Common error
    Chemistry Standard/grade, edition, all limits and product-analysis rule Heat analysis linked to liner marking Ordering only a chromium or manganese percentage.
    Heat treatment Required condition, furnace control and cooling route Traceable furnace chart and load record Accepting “heat treated” without a defined condition.
    Hardness Method, scale, location, surface preparation and range Mapped readings with calibrated equipment Comparing HRC and HB values without valid conversion or location.
    Microstructure Only when technically justified: matrix, carbides, retained phases and sampling Report with preparation method and reference criteria Applying one micrograph limit to unrelated section thicknesses.
    Mechanical tests Tensile/impact requirement, specimen type, orientation and representation Test report connected to heat/lot Assuming a separate coupon reproduces every local liner section.

    Liner profile, charge motion and DEM limits

    Lifter geometry should create the charge motion required by the comminution duty without excessive direct impact on liners or the shell. Mill speed, filling, ball size, liner wear and ore condition change the trajectory. Discrete-element modelling can compare concepts, but its results depend on calibration inputs and assumptions. It is a decision tool, not proof of guaranteed throughput or wear life.

    Profile changes require process and mechanical review. Raising lifters can increase lifting until trajectories become damaging; reducing spacing can alter packing and available volume. Grate and pulp-lifter changes may relieve or create discharge limitations. Record the design revision and do not mix incompatible profiles in one row unless the approved design requires it.

    Fastening, backing and joint control

    A liner system fails when the load path is incomplete. Bolts, nuts, washers, seals, backing, shell condition, hole geometry and liner seating work together. A high-strength bolt cannot compensate for poor contact or an incorrect grip. Tightening values depend on fastener property, lubricant, coating, joint stiffness and the approved preload method.

    Interface Check before installation Failure evidence
    Liner-to-shell Clean contact, backing condition, curvature, high spots and foreign material Polished rocking areas, fretting, broken backing or shell marks.
    Bolt hole and head seat Drawing dimensions, alignment, head form, contact and edge distance One-sided seating, hole battering, bent bolts or head cracking.
    Threaded assembly Property class, thread, nut/washer, lubricant and tool procedure Thread stripping, nut movement, fatigue beach marks or inconsistent elongation.
    Seal Correct material, orientation and compression Slurry leakage, cut seals, corrosion or washout around the hole.
    Panel joints Approved gap/overlap and installation sequence Peening, trapped material, local chipping or liner migration.

    For a deeper fastening review, use the mill liner bolt selection and failure guide. The mill must be isolated before inspection or tightening; work must follow the OEM and site energy-control procedure.

    Metallic grinding mill liner profiles for dimensional and fixing inspection
    Existing EB Castworld media-library photograph retained as a profile reference. It does not establish alloy grade, hardness, service history or customer-project ownership.

    Wear measurement and replacement decisions

    Metso states that regular wear follow-ups provide profile data needed to improve lining design and plan maintenance. Establish a repeatable baseline at installation and measure the same locations, datums and mill hours at each inspection. Manual thickness readings, templates, weight, photogrammetry or 3D scans can be used when their accuracy and safety are controlled.

    Do not decide replacement from average thickness alone. Minimum remaining wall, bolt-hole proximity, cracks, local washout, loose panels, deformation and the ability to complete the next operating interval all matter. The OEM or authorized engineer should define limits. Measurement never justifies personnel entering an inadequately isolated mill.

    Failure modes and evidence-based diagnosis

    Observation Possible contributors Evidence to collect
    Premature abrasive loss Ore change, wrong material/matrix, low hardness, unfavorable profile or slurry corrosion Feed data, wear map, chemistry, hardness, metallography and operating trends.
    Cracked or broken liner Impact, casting defect, excessive hardness, thin section, poor seating or bolt loading Fracture location, photos before removal, NDT, fracture surface, heat and installation record.
    Loose liner or bolt Preload loss, joint settlement, wrong fastener, leakage, backing failure or hole mismatch Torque/preload record, nut position, thread condition, liner contact and bolt fracture analysis.
    Uneven row wear Feed distribution, mixed profiles, charge motion, liner orientation or installation error Position-coded scan, row map, rotation, operating conditions and drawing revision.
    Grate plugging or discharge restriction Aperture/profile, pebble size, slurry, worn lifters or process change Throughput, pool indicators, grate map, pebble distribution and pulp-lifter inspection.

    Do not select a harder alloy before identifying the dominant mechanism. A crack can start from design, manufacture, installation or operation. Preserve fracture surfaces from grinding and weather, retain part identity and document the as-found condition.

    Installation and reline safety boundary

    Relining involves massive components, suspended loads, stored energy, restricted access and tools inside a confined machine. OSHA 29 CFR 1910.147 establishes hazardous-energy control requirements for covered U.S. general-industry maintenance. The site must apply its jurisdiction, OEM procedure, lift plan, isolation verification and confined-space rules. This article is not a work instruction.

    • Verify electrical, hydraulic, pneumatic, gravitational and rotational isolation.
    • Use engineered lifting points and approved tools; never infer capacity from appearance.
    • Control liner orientation, sequence and temporary stability.
    • Keep personnel outside line-of-fire and crush zones.
    • Record each installed part, position, fastener lot and tightening evidence.
    • Complete the approved post-startup inspection or retightening plan.

    Inspection and quality-document package

    Define visual, dimensional, chemistry, hardness, NDT and traceability requirements before production. Radiography or ultrasonic examination is not automatically suitable for every geometry or alloy; specify method, zones, stage and acceptance criteria. Magnetic-particle testing applies only where material condition permits it. Liquid penetrant testing identifies surface-opening discontinuities but requires a written acceptance standard.

    A practical dossier can include approved drawing, material certificate, heat-treatment chart, hardness map, dimensional report, NDT reports, repair/deviation records, part marking, packing list and release certificate. The document type and language should be agreed in the purchase order.

    Controlled trial and performance comparison

    When changing material or profile, define a controlled trial. Mark liner positions, capture new dimensions and mass, keep operating data, measure at fixed intervals and record removal condition. Compare wear rate, not only calendar life. Throughput, ore, charge, mill hours and maintenance practice must be considered before attributing an outcome to the liner.

    A successful trial applies to the documented duty. It does not justify a universal percentage-life, energy-saving or cost guarantee. Changes to profile that affect grinding performance require process-engineering approval even if the material itself looks satisfactory.

    Mill liner RFQ checklist

    1. Mill OEM/model, diameter, length, speed, power, rotation and liner zone.
    2. Approved new-liner drawing, 3D model if available and revision priority.
    3. Current material/grade, heat treatment, hardness and certificate.
    4. Feed, product, ore, charge, slurry and operating data.
    5. Position-coded wear scans, failure photos and achieved mill hours/tonnage.
    6. Required material standard, chemistry, hardness, impact or microstructure criteria.
    7. Profile, dimensions, tolerances, machining, minimum wall and mass limits.
    8. Bolt, nut, washer, seal, backing and tightening/interface requirements.
    9. NDT zones, methods, acceptance and required quality documents.
    10. Quantity by position, spares, marking, packaging, destination and shutdown date.

    Related EB Castworld product and technical pages

    Review grinding mill liners, chrome-molybdenum mill liners and ball mill liners. Compare rubber and manganese steel liners, then use the mining wear-casting RFQ guide. General quality assurance and factory capability pages do not replace part-specific approval.

    Send drawings and operating evidence

    Use the contact page to send the drawing, position list, service data, wear measurements, material/inspection requirements, quantity and destination. Final material, geometry, fixing and installation method must follow customer-approved documents.

    References and engineering boundary

    Boundary: Mill performance, structural integrity, replacement criteria, lifting and installation remain the responsibility of the mill owner, OEM and authorized engineers. No service-life, throughput, energy or savings result is guaranteed without a controlled application and evidence.