• Search for:

    Engineering Resources

    Engineering Guides for Casting, Material Selection and RFQ Preparation

    This hub organizes EB Castworld articles by the question an engineer, purchaser or maintenance team needs to answer. It does not replace the existing Blog archive and does not change article URLs. The purpose is to surface a smaller set of useful guides on material selection, inspection, failure analysis, RFQ preparation, installation and maintenance.

    Send Drawings for Quote View All Engineering Articles

    Operator checking alloy chemistry with a laboratory spectrometer
    Chemical analysis supports material verification against the applicable order specification.

    Material Selection and Alloy Chemistry

    Use these guides to frame material questions before issuing an RFQ. They explain why product form, standard, chemistry, heat treatment, microstructure, section and service conditions must be reviewed together. They are educational resources, not material approvals or universal property guarantees.

    Cobalt-Based Alloys

    Co-Cr-W-Mo composition, wear-selection boundaries and documentation questions.

    Spark optical emission spectrometer used for metal chemistry verification
    The inspection plan, test method and reporting requirements should be stated in the RFQ and approved documents.

    Inspection, Quality and Failure Analysis

    Inspection evidence is useful only when it is tied to the correct part, drawing revision, lot or heat and acceptance criteria. The following guides help purchasers distinguish observations from conclusions and define what must be checked before release.

    Review EB Castworld QC Assurance information, then define project-specific standards, sampling, acceptance levels and document formats in the RFQ.

    RFQ, Installation and Maintenance

    These guides help turn a product requirement into a comparable quotation and a controlled installation or maintenance task. They do not authorize equipment changes or replace OEM instructions, site procedures or the purchaser’s engineering review.

    How to use these resources in an RFQ

    1. Start with the controlled drawing and equipment boundary.
    2. Select the guide that matches the decision: material, failure, inspection or installation.
    3. Record unresolved technical questions and purchaser/OEM decisions.
    4. Put the agreed grade, process, test and acceptance requirements into the RFQ or drawing.
    5. Ask suppliers to separate confirmed scope from proposed alternatives.

    The articles provide general engineering and procurement guidance. They do not approve a design, establish site safety measures, certify a material for a particular environment or promise performance. Final requirements must be confirmed by the responsible purchaser and approved documentation.

    Send the Drawing Package for Quote Browse the Full Blog Archive