Hardox Board /Hardox400 Plate

Hardox400

Huanda 400 wear-resistant plate bimetal composite wear-resistant steel plate is composed of low carbon steel plate and alloy wear-resistant layer. The wear-resistant layer generally accounts for 1/3-1/2 of the total thickness. When working, the matrix provides comprehensive properties such as strength, toughness and plasticity against external forces, and the wear layer provides wear resistance that meets the requirements of the specified working conditions.

“1” HARDOX 400 is a wear-resistant steel plate with a Brinell hardness of 400HB. It has good cold bendability and is mainly used in anti-wear conditions. HARDOX 400 has very good solderability.

“2” HARDOX400 wear-resistant steel applications: crusher, sieve plate, feeder, feed hopper, hoist, blade, conveyor, bucket, blade, gear, dump truck, scraper, industrial Trucks, railway wagons, bulldozers, excavators. Slurry pipe, screw conveyor, press, etc.

“3” HARDOX400 is: “fine grain steel”.

“4” HARDOX400 Harda wear-resistant steel hardness: 370-430HBW.

“5” HARDOX400 Harda wear-resistant steel mechanical properties: yield strength Re = 1000MPa. Tensile strength Rm=1250MPa. Elongation A5=10% (typical value of 20 mm thick steel plate).

“6” HARDOX400 Harda wear-resistant steel impact toughness: test temperature: -40 (-40F) ℃. Impact energy Charpy-V longitudinal = 45J (typical value of 20 mm thick steel plate).

“7” HARDOX400 wear-resistant steel delivery status: quenched.

“8” HARDOX400 wear-resistant steel executive standard: EN 10 204-3.1.

“9” product application:

“10” has high hardness, high strength and high toughness. For those occasions with severe wear, HARDOX wear-resistant plate is obviously the ideal choice. The high wear resistance of the steel plate extends the service life of dump truck bodies, excavator buckets, crushers and similar equipment.

The hardness of the “11” steel plate is obtained through an effective quenching process on our water quenching line. This method can not only obtain a higher hardness, but also maintain a lower alloy composition in the steel. The resulting wear plate is easy to machine, bend and weld.

Hardox400 Plate

product description:

HARDOX wear-resistant steel plate is divided into: HARDOX 400, HARDOX 450, HARDOX 500, HARDOX 550, HARDOX 600 and HARDOX HiTuf. This means that you can always find a HARDOX steel plate that meets your specific needs.

HARDOX 400 and HARDOX 450 are multi-purpose wear plates. Due to its high toughness, good bending and welding properties, it can also be used as a load bearing in some applications.

HARDOX 500 is a wear-resistant plate that can be bent and welded, and can be used in areas that require higher wear resistance.

HARDOX 550 is a wear-resistant steel plate with an average hardness of 550HBW. Its toughness is the same as HARDOX 500. It is used in high-wear applications. It is mainly aimed at users and manufacturers who use high-manganese steel castings or wear-resistant steel plates with a Brinell hardness of 500. When upgrading from HARDOX 500 steel plate to this product, the Brinell hardness is increased by 50 units, and the wear life is extended without losing the toughness of the steel plate. Learn more: HARDOX 550, HARDOX 550 in the Workshop

HARDOX 600 is the hardest wear-resistant steel plate in the world, with a hardness value of 600HBW. It is generally used in extremely severe wear and tear, and is mainly used to replace cast steel, chromium alloy cast iron and surface hardened metal. Despite its high hardness, we can still machine, weld and cut it. Although the hardness of HARDOX 600 is very high, it still has a fairly high impact toughness.

HARDOX HiTuf is a wear-resistant steel plate with extremely high toughness, and its crack resistance is very good. The average hardness of HARDOX HiTuf is 350HBW, which is mainly used for important components that require extremely high wear resistance and crack resistance. Learn more: HARDOX HiTuf, HARDOX HiTuf in the Workshop.

Uses: HARDOX400 imported Swedish wear-resistant steel plate can be used to manufacture buckets, loaders, dump trucks, crushers, powder separators, chutes and various wear-resistant linings. HARDOX450 uses: dump truck body, vibration screen, feed hopper, bucket, blade, bucket, scraper conveyor, gear and so on.

Hardox500

Huanda 500 wear-resistant plate is a wear-resistant steel plate with Brinell hardness of 500HB, which is mainly used in anti-wear conditions. Handa 500 wear plate applications: crusher, sieve plate, feeder, feed hopper, hoist, blade, conveyor, bucket, knife plate, gear, sprocket, etc.

  1. Purpose

“1” HARDOX 500 is a wear-resistant steel plate with Brinell hardness of 500HB, which is mainly used in anti-wear conditions.

“2” HARDOX500 wear-resistant steel applications: crusher, sieve plate, feeder, feed hopper, hoist, blade, conveyor, bucket, blade, gear, sprocket, etc.

“3” HARDOX500 is: “fine grain steel”. “4” Hardox 500 Harda wear-resistant steel hardness: 4-32MM=470-530HBW. 32-80MM=450-540HBW.

  1. Performance

“5” HARDOX500 Harda wear-resistant steel mechanical properties: yield strength Re = 1400MPa. Tensile strength Rm=1600MPa. Elongation A5=10% (typical value of 20 mm thick steel plate).

“6” HARDOX500 Honda wear-resistant steel impact toughness: test temperature: -40 (-40F) ℃. Impact energy Charpy-V longitudinal = 45J (typical value of 20 mm thick steel plate).

“7” HARDOX500 wear-resistant steel delivery status: quenched.

“8” HARDOX500 Harda wear-resistant steel executive standard: EN 10 204-3.1.

“9” HARDOX500 product application:

“10” has high hardness, high strength and high toughness. For those occasions with severe wear, HARDOX wear-resistant plate is obviously the ideal choice. The high wear resistance of the steel plate extends the service life of dump truck bodies, excavator buckets, crushers and similar equipment.

The hardness of the “11” steel plate is obtained through an effective quenching process on our water quenching line. This method can not only obtain a higher hardness, but also maintain a lower alloy composition in the steel. The resulting wear plate is easy to machine, bend and weld.

  1. Product introduction

“12” HARDOX500 product introduction:

HARDOX wear-resistant steel plate is divided into: HARDOX 400, HARDOX 450, HARDOX 500, HARDOX 550, HARDOX 600 and HARDOX HiTuf. This means that you can always find a HARDOX steel plate that meets your specific needs.

HARDOX 400 and HARDOX 450 are multi-purpose wear plates. Due to its high toughness, good bending and welding properties, it can also be used as a load bearing in some applications.

HARDOX 500 is a wear-resistant plate that can be bent and welded, and can be used in areas that require higher wear resistance.

HARDOX 550 is a wear-resistant steel plate with an average hardness of 550HBW. Its toughness is the same as HARDOX 500. It is used in high-wear applications. It is mainly aimed at users and manufacturers who use high-manganese steel castings or wear-resistant steel plates with a Brinell hardness of 500. When upgrading from HARDOX 500 steel plate to this product, the Brinell hardness is increased by 50 units, and the wear life is extended without losing the toughness of the steel plate. Learn more: HARDOX 550, HARDOX 550 in the Workshop Purpose: HARDOX 500 is typically hardened to 500 HBW and can withstand severe wear. It is very suitable for working in strong abrasive environments, such as high-strength ores and corrosive materials.

HARDOX 600 is the hardest wear-resistant steel plate in the world, with a hardness value of 600HBW. It is generally used in extremely severe wear and tear, and is mainly used to replace cast steel, chromium alloy cast iron and surface hardened metal. Despite its high hardness, we can still machine, weld and cut it. Although the hardness of HARDOX 600 is very high, it still has a fairly high impact toughness.

Hardox550

HARDOX550 is a wear-resistant steel plate with an average hardness of 550HBW, which is used in high-wear applications. It is mainly aimed at users and manufacturers who use high manganese steel or wear-resistant steel plates with a Brinell hardness of 500. When upgrading from HARDOX500 steel plate to this product, the Brinell hardness is increased by 50 units, and the service life of the steel plate is extended without losing the toughness of the steel plate, so that it can withstand severe wear. It is suitable for working in strong abrasive environments, such as high-strength ores and corrosive materials.

HARDOX550 Brinell hardness is HBW525-575, the thickness can be supplied: 10-50mm, can be used in: lining plate, bolted blade, wear strip, hoist, chute, feeder, sieve plate, cutter, Crusher, shredder, hammer head, knife board, etc.

 

Eternal Bliss Alloy Casting & Forging Co, Ltd.

Technical Dept.

E-mail: sales@ebcastworld.com

What’s app: 0086-13093023772

www.ebcastworld.com

 

[carousel_slide id=’765′]