29Jan, 2026
Different Types of Ceramic Linings
Ceramic linings are high-performance protective materials used to shield industrial equipment from abrasion, corrosion, high temperatures, and impact. Widely applied in pipelines, tanks, mills, and reactors, they extend equipment service life, reduce maintenance costs, and optimize operational efficiency.
Not all ceramic linings are the same—their performance varies by material composition, manufacturing process, and design. From alumina to zirconia, each type is engineered to tackle specific industrial challenges. This guide breaks down the most common ceramic lining types, their key characteristics, and ideal applications for industrial users.

1. Alumina Ceramic Linings (Al₂O₃)

Alumina ceramic linings are the most widely used type, made from aluminum oxide (Al₂O₃) with varying purity levels. They balance cost-effectiveness and performance, making them a versatile choice for most industrial wear and corrosion scenarios.
  • Core Characteristics: High hardness (HV 1500-2200); excellent abrasion resistance (3-5x higher than steel); good chemical stability (resistant to most acids, alkalis, and organic solvents); operating temperature up to 1200℃.
  • Key Variants: 92% alumina (cost-effective, for general abrasion); 95% alumina (higher hardness, for moderate corrosion); 99% alumina (ultra-pure, for high-precision, high-abrasion applications).
  • Performance Traits: Brittle under heavy impact (requires rubber/steel backing for shock absorption); low thermal conductivity (reduces heat transfer to equipment); smooth surface minimizes material adhesion.
  • Typical Applications: Mining pipelines (slurry transport), mill liners (SAG/ball mills), coal-fired power plant chimneys, and chemical storage tanks.
  • Pros & Cons: Pros – Cost-effective, versatile, excellent abrasion resistance. Cons – Poor impact resistance, prone to cracking under heavy loads without backing.

2. Zirconia Ceramic Linings (ZrO₂)

Zirconia ceramic linings are premium options made from zirconium oxide (ZrO₂), enhanced with stabilizers (yttria, magnesia) to improve toughness. They excel in high-temperature and high-impact environments where alumina linings fall short.
  • Core Characteristics: Exceptional toughness (higher than alumina); high hardness (HV 1200-1800); superior thermal shock resistance (withstands rapid temperature changes from -200℃ to 1600℃); good corrosion resistance.
  • Key Variants: Yttria-stabilized zirconia (YSZ, most common, for high-temperature applications); magnesia-stabilized zirconia (MSZ, for corrosive environments); ceria-stabilized zirconia (CSZ, for low-temperature toughness).
  • Performance Traits: Resists cracking from impact and thermal cycling; retains strength at extreme temperatures; slightly lower abrasion resistance than alumina but far more durable in harsh conditions.
  • Typical Applications: High-temperature furnaces, jet engine components, molten metal handling equipment, and impact-prone pipelines (ore transport).
  • Pros & Cons: Pros – High toughness, excellent thermal shock resistance, extreme temperature tolerance. Cons – Higher cost than alumina, lower abrasion resistance for non-high-temperature uses.

3. Silicon Carbide (SiC) Ceramic Linings

Silicon carbide ceramic linings are engineered for extreme abrasion and high-temperature environments. Made from silicon carbide (SiC), they offer the best abrasion resistance among all ceramic lining types.
  • Core Characteristics: Unmatched abrasion resistance (HV 2000-2800); high thermal conductivity (dissipates heat quickly); excellent chemical resistance (resistant to strong acids, alkalis, and molten salts); operating temperature up to 1400℃.
  • Key Variants: Reaction-bonded SiC (RBSC, cost-effective, good toughness); sintered SiC (SSC, higher purity, better abrasion resistance); nitride-bonded SiC (NBSC, improved thermal shock resistance).
  • Performance Traits: Brittle but less so than alumina; excellent resistance to erosion from high-velocity fluids/slurries; maintains structural integrity at high temperatures.
  • Typical Applications: High-velocity slurry pipelines, pump casings, chemical reactors (strong acid/alkali), and refractory linings for furnaces.
  • Pros & Cons: Pros – Best abrasion resistance, high thermal conductivity, excellent chemical resistance. Cons – Brittle, higher cost than alumina, requires careful installation to avoid cracking.

4. Boron Carbide (B₄C) Ceramic Linings

Boron carbide ceramic linings are specialized for ultra-high abrasion and impact resistance. Made from boron carbide (B₄C), they are one of the hardest materials known (second only to diamond), ideal for extreme industrial conditions.
  • Core Characteristics: Extreme hardness (HV 2800-3500); superior abrasion resistance (5-10x higher than alumina); good chemical inertness (resistant to most chemicals); operating temperature up to 800℃ (decomposes above 1000℃).
  • Key Variants: Sintered B₄C (high purity, ultra-hard); composite B₄C (mixed with binders for improved toughness); coated B₄C (for enhanced thermal stability).
  • Performance Traits: Very brittle (requires heavy backing for impact protection); low thermal conductivity; poor thermal shock resistance (prone to cracking from rapid temperature changes).
  • Typical Applications: Ultra-abrasive ore processing equipment, bulletproof armor (industrial safety), grinding media, and precision cutting tools.
  • Pros & Cons: Pros – Extreme hardness, unmatched abrasion resistance, chemical inertness. Cons – Very brittle, high cost, poor thermal shock resistance, limited high-temperature use.

5. Composite Ceramic Linings

Composite ceramic linings combine ceramic materials (alumina, zirconia, SiC) with binders (rubber, epoxy, steel) to leverage the strengths of each component. They are customizable to meet specific wear, impact, and temperature requirements.
  • Core Characteristics: Customizable performance (abrasion + impact + corrosion resistance); improved toughness (from binders); easy installation (modular design); operating temperature varies by ceramic component (up to 1600℃).
  • Key Variants: Ceramic-rubber composite (impact + abrasion resistance); ceramic-steel composite (heavy impact resistance); ceramic-epoxy composite (lightweight, corrosion-resistant).
  • Performance Traits: Binders absorb impact to prevent ceramic cracking; ceramic layer provides abrasion/corrosion protection; modular design reduces maintenance downtime.
  • Typical Applications: Mixed-wear environments (abrasion + impact), large pipelines, mill liners, and chemical equipment with variable operating conditions.
  • Pros & Cons: Pros – Customizable, improved toughness, easy installation. Cons – Higher cost than single-material ceramic linings, performance depends on binder quality.

6. Glazed Ceramic Linings

Glazed ceramic linings are alumina/zirconia linings with a protective glaze coating. The glaze enhances corrosion resistance and surface smoothness, making them ideal for applications where material adhesion and chemical attack are concerns.
  • Core Characteristics: Smooth, non-stick surface (minimizes material adhesion); enhanced corrosion resistance (glaze acts as a chemical barrier); good abrasion resistance (from ceramic base); operating temperature up to 1000℃.
  • Key Variants: High-gloss glaze (maximum smoothness); anti-corrosion glaze (for acidic/alkaline environments); heat-resistant glaze (for high-temperature applications).
  • Performance Traits: Glaze prevents chemical penetration; ceramic base resists abrasion; easy to clean (no material buildup).
  • Typical Applications: Food processing equipment, pharmaceutical reactors, chemical storage tanks, and slurry pipelines with sticky materials.
  • Pros & Cons: Pros – Non-stick surface, enhanced corrosion resistance, easy cleaning. Cons – Glaze can chip (exposing ceramic base), lower impact resistance.

Key Selection Criteria for Ceramic Linings

Choose the right ceramic lining by matching its properties to your operational conditions. Here are the critical factors to consider:
  • Wear Type: Extreme abrasion → SiC/B₄C; Abrasion + impact → Composite/zirconia; General abrasion → Alumina.
  • Temperature Requirements: Below 800℃ → Alumina/B₄C; 800-1400℃ → SiC/alumina; Above 1400℃ → Zirconia.
  • Chemical Environment: Strong acids/alkalis → SiC/zirconia/glazed ceramic; Mild chemicals → Alumina.
  • Impact Load: Heavy impact → Composite/zirconia; Low impact → Alumina/SiC/B₄C.
  • Cost & Maintenance: Budget-friendly → Alumina; High-performance → Zirconia/SiC/B₄C; Easy maintenance → Composite/glazed ceramic.

Why Quality Ceramic Linings Matter

Low-quality ceramic linings suffer from premature cracking, chipping, and material degradation—leading to unplanned downtime, equipment damage, and increased maintenance costs. High-quality ceramic linings, manufactured with precise material control and advanced processing, ensure consistent performance, withstand extreme industrial conditions, and maximize equipment service life.
Need help selecting the right ceramic lining for your application? Share your operational conditions (temperature, wear type, chemical environment, and budget) for a free customized recommendation!

Tel: 0086- 18151503523‬‬   (What’s app)

Cell: 0086-‪18151503523

Fax: 0086-510-6879 2172

E-mail: sales@ebcastworld.com

EB Casting Makes Metal Better

EB Machine Makes World Better

EB Ebike Makes Your Life Better.

Wuxi Eternal Bliss Alloy Casting & Forging Co.,LTD.