6%Co and 94% Tungsten Carbide Balls Use for Pumps,Valves,Bearings

  • Brand: EB
  • 6%Co and 94% Tungsten Carbide Balls Use for Pumps,Valves,Bearings
  • Material Grade: S20






    Description

    ZAlCu10 High precision Alu Cast Parts EB9090

    6%Co and 94% Tungsten Carbide Balls 

    1, Gerneral grade for cobalt carbide balls

    Grade

    Cobalt Content

    Density

    g/cm3

    Hardness

    HRA

    TRS

    Mpa

    YG8

    8%

    14.80

    89.5

    2200

    YG6

    6% 

    14.95

    90.5

    1900

    YG6X

    6%

    14.95

    91.5

    1800

    YG10

    10%

    14.50

    88.0

    2650

    YG13

    13%

    14.10

    86.5

    2500

    2, Characteristics

     Typcal grade composition 6%co and 94% tungsten carbide

    -Corrosion resistance and shining surface finish

    -wide application such as pumps, valves, measurement, balls screws, bearings, gaugings

    TC Precision Balls Tungsten Carbide Ball/Common Grades of Cemented Carbide Balls

    YG3,YG3X,YG6,YG6X,YG8,YG8X,YG13,YN6,YN9,YT5,YT15.

    Our Photos for 6%Co and 94% Tungsten Carbide Balls :

    6%Co and 94% Tungsten Carbide Balls

    Grade Hardness Density Bendingstrength Recommended Applichaton
    YG6X 91-93 14.8-15 ≥1600 Suitable for little stress coditions,produce for small diameter steel wire,non-ferrous metal wire or rod
    YG6 90.5-92 14.8-15 ≥2000 Suitable for large stress coditions,produce for medium diameter of steel wirec wire or rod
    YG8 89.5-91 14.6-14.8 ≥2100 Suitable for steel,non-ferrous metal and alloy rod tube ,and is suitable for manufactuting machinery parts,tools materials and wear parts
    YG8C 89-90.5 14.6-14.8 ≥2200 Coarse grain size carbide,suitbale for drilling me dium hard or hardstratum with fless than 14th and the coal bed containing hard rock;Coal cutter Bits ;oil Field bits ,and hammer dwill bits
    YG9 87.5-89 14.3-14.5 ≥2200 With good good resistance,impact resistance and good shock resistance,suitable for carbide dril lpills.
    YG9C 87.2-88.6 14.4-14.6 ≥2300 Coarse grain,with good wear resistance,suitable for drilling hard rock
    YG10 87-88.5 14.3-14.6 ≥2300 With good good resistance,excellent impact resistance and flat-tio-serrated compacts
    YG11 89-90.2 14.2-14.5 ≥2300 With good abrasion resistance,suitable for producing nail mating moulds,nails specially for cement industry
    YG11C 86.5-88 14.2-14.5 ≥2400 Coarse grain,With good wear resistance,suitable for drilling hardrock
    YG12 86.5-88 14.1-14.4 ≥2400 With good toughness,suitable for making steel pipe,steel,non-ferrousmetal and alloy rods,bars,tubes
    YG15 87-88.5 13.9-14.2 ≥2400 Low wear resistance ,high bending strength and impact toughness.Suitable for cemented carbide dies,stamp dies and mould cores ,etc.
    YG15C 85-86.5 13.9-14.2 ≥2450 With very good impact and shock resistance,suitable for tungstencarbide dies and mould cores ,etc.
    YG20 83-85 13.4-13.6 ≥2700 Suitanble for wear parts,plates andmechanical  parts.
    YG20C 82.5-84.5 13.4-13.6 ≥2700 Suitable for cold heading moulds,cold punching moulds and cold rolls for standard parts and tools in various industries.
    YN6 90.5-92.5 14.8-15.1 ≥1700 With good corrosinon resistant,excellent wear resistance,suitable for mechanical seal parts.
    YN7 90-92 14.7-14.9 ≥1800 With good corrosinon resistant,excellent wear resistance,suitable for mechanical seal parts.
    YN10 86-88 14.3-14.6 ≥2000 With good corrosinon resistant,suitable wear resistance
    6%Co and 94% Tungsten Carbide Balls Applications:

    It is widely used in hightech areas. Such as: ball screw, inertial navigation system, punching&stretching of precision part, 

    precision bearing, instrument, meter, pen making, coating machine, pump, machine components, sealing valve, brake pump,

     hole extrusion, grinding, measurements, oil field, laboratory, hardness tester, high quality fishing gear,bob-weight, finish machining,etc.

     

    Our Experience 
    • 13 Year Experience in Heat-resistant Steel Field
    • 18 Year Expertise in Wear-resistant Material Field
    • 20 Year Customer-made High Quality Castings & Forgings
    Trading Terms:
    1. The nearest seaport is Shanghai port
    2. The nearest airport is Shanghai Pudong airport
    3. Payment Terms are L/C,TT,West Union,Paypal
    4. Payment Condition is 50% before production, 50% before delivery against complete set of inspection report
    5. Supply Capability is 10,000 tons per year
    6. Sample Availability is yes
    7. Sample Time is 15-30 Days
    8. Packing is Plywood Cases or Steel Crates
    9. Delivery time is about 45 working days per 20 tons regular castings & forgings
    10. Service is OEM, ODM or Customized

    ZAlCu10 High precision Alu Cast Parts EB9090

    1. 20-year Foundry Operation Experience.
    2. Friendly & High Efficient Technical & Commercial Communication.
    3. Professional Export Practices: Exported to +60 Overseas Countries.

    [carousel_slide id=’765′]