Mill Rubber Lifter Bar

  • Brand: EB
    Production Process: Sand Process
    Hardness: ≥ HRC60, BH310-380.
    Surface Finish: Appro.Ra100
    Size Tolerance: as per CT13






    Category: Tags: , , , , ,

    Description

    ZAlCu10 High precision Alu Cast Parts EB9090

    Mill Rubber Lifter Bar

    • Production Process: Sand Process
    • Hardness: ≥ HRC60, BH310-380.
    • Surface Finish: Appro.Ra100
    • Size Tolerance: as per CT13
    • Application: Chute Liners + Hopper Liners + Wear Plates
    • Microstructure: Fine Martensitic + Carbonate + Retained Austenitic less than 5%
    • Heat treatment Process: quenching & tempering treatment to achieve higher hardness and ideal impact value.
    • Material Grade: AS 2074/L2A, AS2074/L2B, AS2074/L2C, ZG45Cr2Mo, ZG30Cr5Mo, ZG40Cr5Mo(FED-4A), ZG50Cr5Mo, FMU-29.
    Our Photos for Mill Rubber Lifter Bar :

    Sag Mill Rubber Lifter Bar Sag Mill Rubber Lifter Bar Sag Mill Rubber Lifter Bar Sag Mill Rubber Lifter Bar

    Chemistry Standard for Mill Rubber Lifter Bar

    Standard Specification for Cr-Mo Alloy Steel:
    Reference Standard     Nominal Chemical Composition (W%)
    CSiMnPSNiCrMo
    AS 2074/L2A0.45-0.55≤0.750.50-1.00≤0.04≤0.04–0.80-1.20–
    AS 2074/L2B0.55-0.65≤0.750.50-1.00≤0.04≤0.04–0.80-1.500.2-0.4
    AS 2074/L2C0.70-0.90≤0.750.50-1.20≤0.04≤0.04–1.30-2.400.2-0.4
    ZG42Cr2Si2MnMo0.38-0.481.5-1.80.8-1.2≤0.04≤0.04–1.8-2.20.2-0.6
    ZG45Cr2Mo0.40-0.480.8-1.20.4-1.0≤0.04≤0.04≤0.51.7-2.00.8-1.2
    ZG30Cr5Mo0.25-0.350.4-1.00.5-1.2≤0.04≤0.04≤0.54.0-6.00.2-0.8
    ZG40Cr5Mo(FED-4A)0.35-0.450.4-1.00.5-1.2≤0.04≤0.04≤0.54.0-6.00.2-0.8
    ZG50Cr5Mo0.45-0.550.4-1.00.5-1.2≤0.04≤0.04≤0.54.0-6.00.2-0.8
    ZG60Cr5Mo0.55-0.650.4-1.00.5-1.2≤0.04≤0.04≤0.54.0-6.00.2-0.8
    FMU-290.25-0.450.3-1.00.6-1.5≤0.04≤0.04–6.0-8.00.2-0.4
    FMU-110.90-1.300.3-1.00.6-1.5≤0.0