Cr-Ni-Mo-N Duplex Stainless Steel Castings for Pump and Valve Components

Custom Cr-Ni-Mo-N duplex stainless steel castings for pump and valve components, with ASTM A890/A995 grade, phase, NDT and drawing-based RFQ controls.

Category:

Description

EB Castworld supplies custom duplex stainless steel castings for pump, valve, flange, fitting and corrosion-service components against customer-approved drawings, material specifications, service data and inspection plans. This page focuses on the iron-chromium-nickel-molybdenum-nitrogen system used in austenitic-ferritic cast stainless steels and on the manufacturing evidence required to convert a grade name into an auditable component. It is a drawing-based quotation page, not a fixed-price catalogue listing.

The words “2205 casting,” “super duplex casting” and “duplex equivalent” are often used too loosely. Wrought UNS S32205 or S32750 product data do not automatically define a cast grade. For cast components, the purchase order must identify the applicable casting specification, grade, heat-treatment condition, mechanical tests, corrosion or intermetallic-phase tests, NDT, repair rules and documentation. Final material, geometry, wall thickness, casting route, machining and installation must follow purchaser-approved documents.

Product scope and equipment boundary

Potential quotation families include pump casings, impellers, diffusers, valve bodies, bonnets, discs, flanges, fittings and other drawing-defined corrosion-resistant castings. Sand moulding may be evaluated for larger or lower-volume geometries. Investment casting may be evaluated for smaller, more complex parts where ceramic-shell tooling, surface and dimensional requirements justify it. The route is selected after manufacturability review; neither process is promised for every size, pressure class or internal passage.

Component family Required drawing inputs Required service inputs Engineering boundary
Pump casing or diffuser Hydraulic profile, wall map, flanges, datums, machining, pressure zones and NDT coverage Fluid chemistry, pressure, temperature, velocity, solids, cycles and cleaning The purchaser or pump OEM approves hydraulic performance and pressure design.
Impeller or rotating detail Vane geometry, rotation, shaft interface, clearances, balance requirement and minimum wall Speed, flow, head, cavitation history, solids and corrosion history Physical fit does not establish hydraulic interchangeability.
Valve body, bonnet or disc Pressure class, flow path, seats, stem interfaces, bolting, weld ends and test requirements Complete process fluid, pressure-temperature envelope, cycling and shutoff duty Code and valve design approval remain with the responsible design authority.
Flange or fitting Facing, bore, wall, end preparation, tolerances, marking and pressure test Line class, medium, corrosion allowance, design temperature and joining route A material certificate alone does not certify a finished pressure system.
Stainless steel cast branch fittings used as a duplex casting geometry and inspection reference
Existing EB Castworld media-library photograph of cast branch fittings. Its original customer, project, heat number and exact alloy provenance was not independently re-established; the image is used only for geometry and inspection planning.

Cr-Ni-Mo-N chemistry: why duplex is a balanced alloy system

Duplex stainless steel contains significant ferrite and austenite. Chromium, molybdenum and silicon generally promote ferrite, while nickel, nitrogen, carbon and manganese influence austenite formation to different degrees. The final phase balance also depends on solidification, section size, solution heat treatment and cooling rate. Therefore, one chromium number, one PREN calculation or one ferrite reading cannot establish complete conformity or service suitability.

Element Technical role to review Casting risk or purchasing caution Acceptance evidence
Chromium (Cr) Supports passivation and is a strong ferrite-forming element. Higher Cr can also increase the tendency toward detrimental intermetallic phases if thermal history is unsuitable. Complete heat/product analysis against the ordered cast grade, plus approved heat treatment.
Nickel (Ni) Promotes austenite and helps balance the chromium- and molybdenum-bearing ferrite. Nickel must be assessed with N, Cr, Mo and cooling history; it is not a stand-alone phase-control number. Traceable chemistry and phase-related verification where specified.
Molybdenum (Mo) Can improve localized-corrosion resistance in suitable environments and promotes ferrite. Mo-rich grades may be more sensitive to intermetallic precipitation after harmful thermal exposure. Grade compliance, solution heat-treatment record and any ordered ASTM A923 testing.
Nitrogen (N) Promotes austenite, increases strength and contributes to pitting-resistance calculations. Nitrogen analysis requires an appropriate method; it must not be inferred from a handheld XRF reading. Laboratory nitrogen result reported with the full heat chemistry.
Carbon (C) Controlled at low levels in duplex grades to manage carbide-related effects and weldability. Portable PMI frequently cannot determine carbon accurately. Laboratory combustion analysis or another approved method.
Copper and tungsten (Cu, W) Intentional additions in selected cast grades can affect corrosion response and alloy balance. They are grade-specific; values must not be transferred between 4A, 5A, 6A, 7A or proprietary alloys. Current grade limits and complete certificate.
Silicon, manganese, phosphorus and sulfur Influence melting, deoxidation, castability and residual control. They remain part of grade compliance even when marketing emphasizes Cr-Ni-Mo-N. Reported heat analysis and applicable product-analysis rules.

ASTM A890 and ASTM A995 are different purchasing routes

ASTM A890/A890M-26 covers iron-chromium-nickel-molybdenum corrosion-resistant duplex castings for general application. ASTM A995/A995M-20 covers duplex stainless steel castings for valves, flanges, fittings and other pressure-containing parts. A995 requires the purchaser to select the grade according to design, service, mechanical properties and corrosion characteristics. The standards are related but not interchangeable labels.

Order route Typical scope What the RFQ must state What the standard does not decide
ASTM A890/A890M-26 General corrosion-resistant duplex castings Edition, grade, heat treatment, mechanical tests, supplementary requirements and acceptance Equipment design, exact process compatibility, pressure code or service life.
ASTM A995/A995M-20 Pressure-containing valves, flanges, fittings and related parts Grade, common requirements, tensile tests, pressure/NDT requirements and purchaser-selected supplementary controls Valve class, body design, corrosion allowance or system compliance by itself.
Customer or OEM specification Application-specific pump or valve casting Relationship to ASTM grade, tighter chemistry, ferrite, impact/corrosion test, NDT and repair rules Automatic equivalence to another OEM or service.
Proprietary “2205/2507-type” request Early material-screening language only Convert to a controlled cast designation before quotation release Wrought-to-cast substitution or pressure approval.

Grade names that may appear in duplex casting specifications

ASTM A800/A800M-20 identifies cast duplex examples such as CD4MCuN, CE8MN, CD6MN, CD3MN, CE3MN, CD3MWCuN and CD3MWN. Their numbered grade mappings and chemical limits must be taken from the current product specification. EB Castworld does not treat “super duplex” as a sufficient purchase designation and does not promise that a generic cast grade is equivalent to wrought 2205 or 2507.

PREN is a screening calculation, not a corrosion guarantee

A commonly used pitting-resistance equivalent expression is PREN = %Cr + 3.3 × %Mo + 16 × %N. Tungsten-bearing specifications may use a modified expression that includes part of W. These formulas are useful for comparing nominal alloy chemistry, but they do not measure casting defects, local segregation, phase balance, intermetallic precipitation, surface condition, crevices, galvanic effects or actual process-fluid compatibility.

Input Effect in the screening formula What the formula misses RFQ response
Cr Direct contribution Chromium tied up in phases, heat tint, scale, surface damage and local depletion Require grade chemistry, controlled heat treatment and final surface requirements.
Mo Weighted contribution Intermetallic precipitation, segregation and service-specific reducing/oxidizing behavior Use current grade limits and phase/corrosion tests when justified.
N Strong weighted contribution Local phase distribution and analytical uncertainty Report laboratory nitrogen and representative sampling.
W in selected formulas Partial weighted contribution Grade-specific thermal response and actual corrosion mechanism Use only the formula required by the governing specification.

No PREN threshold on this page is a promise of seawater, chloride, acid, sour-service or erosion-corrosion suitability. The equipment owner must review concentration, temperature, pressure, aeration, velocity, deposits, crevice geometry, solids, cleaning chemicals and upset conditions. Laboratory or field evidence may be necessary.

Cast pump body components illustrating moulding, feeding and machining datum requirements
Existing EB Castworld media-library photograph of pump-body castings. Appearance does not prove duplex grade, ASTM A890/A995 compliance, pressure class or customer acceptance; those facts require traceable records.

Sand casting versus investment casting

Sand casting can suit larger bodies, thicker sections and lower-volume components where cores, feeders and machining allowances can be designed around the geometry. Investment casting can suit smaller complex parts, thinner features or reduced machining where tooling and ceramic-shell control are practical. Neither route is inherently superior. Wall transitions, internal passages, required NDT sensitivity, pressure risk, quantity and machining datums drive the decision.

Decision factor Sand-casting review Investment-casting review Purchaser input
Part size and mass Often considered for larger bodies and heavier sections Often considered for smaller or medium complex components Drawing, mass estimate, quantity and handling limits.
Internal passages Core design, support, cleaning access and core shift Ceramic cores or complex wax/shell feasibility Flow-path tolerances and inspectability.
Surface and tolerance Machining stock and surface comparator must be defined Can reduce stock for suitable geometry but is not automatically net shape Datums, CTQ tolerances, finish and allowance.
Internal quality Feeding, chills, risers and section transition control Gating, shell, hot spots and solidification control NDT method, coverage and acceptance standard.
Tooling and volume Pattern/core-box route and expected repeat demand Wax tooling and assembly repeatability Prototype and production quantities.

Melting, pouring and solidification controls

A duplex heat requires controlled charge identification, complete chemical analysis and an approved melting/refining route. The quotation must not imply argon-oxygen decarburization, vacuum processing or a particular furnace unless the route is confirmed. Nitrogen and low-carbon control deserve explicit attention. Return material, revert percentage, deoxidation, tap and pour temperatures and holding time may be restricted by the approved procedure or customer specification.

Solidification rate changes with wall thickness, gates, risers, cores and chills. Local segregation can produce different phase-forming tendencies across the casting. Abrupt section changes can also increase feeding and hot-tear risk. Any proposal to change fillets, pads, ribs, wall transitions or machining stock is subject to purchaser drawing approval.

Solution heat treatment, rapid cooling and intermetallic phases

Duplex casting specifications require grade-appropriate heat treatment and rapid cooling. The objective is not merely to reach a furnace set point; the route must dissolve undesirable constituents and develop an acceptable austenite-ferrite structure while avoiding damaging intermetallic precipitation. Load arrangement, furnace uniformity, section thickness, transfer and quench effectiveness all influence the result.

ASTM A923-25 explains that certain duplex stainless steels can form detrimental intermetallic compounds during exposure in approximately 320-955 °C and that chemical and mechanical compliance alone does not necessarily prove their absence. Its sodium-hydroxide etch, Charpy impact and ferric-chloride corrosion methods have defined scopes and grade tables. The purchase order must specify the applicable method, specimen location and acceptance; A923 is not automatically valid for every proprietary or lean-duplex grade.

Heat-treatment control Record or test Why location matters Boundary
Furnace cycle Traceable time-temperature chart and load identity A thick body or local boss may heat and cool differently from a test coupon The chart documents the furnace cycle, not every local phase fraction.
Rapid cooling Quench medium, transfer, load arrangement and process record The slowest-cooling section can be most susceptible to phase precipitation Quench details must be developed for the actual geometry.
ASTM A923 testing Ordered method, specimen location/orientation and report Sampling should represent the region most likely to experience harmful thermal history Only applies when the grade and method scope are confirmed.
Mechanical tests Tensile, impact or other tests from specified coupons Separately cast coupons may not reproduce every heavy section Coupon representation must be agreed.

Ferrite-austenite balance and measurement

ASTM A995/A995M-20 notes that its properly balanced and heat-treated grades commonly develop approximately 30-60% ferrite with the balance austenite, while the specification itself does not set ferrite levels. A purchaser may impose a justified range through the order, applicable code or OEM specification. The sampling location, method, surface and acceptance tolerance must be specified.

ASTM A800/A800M-20 describes composition-based, magnetic and metallographic estimates for stainless castings containing ferrite and austenite. It warns that segregation, analytical variation, surface curvature, roughness, other phases and etching/counting technique can affect results. Metallographic point count can provide a more accurate estimate when properly sampled, but one polished coupon still does not describe an entire complex casting.

Stainless steel casting bores and branch features for wall thickness and penetrant inspection review
Existing EB Castworld media-library photograph. It is not presented as a named customer project, and material grade, service history and manufacturing route cannot be established from the photograph alone.

Machining, weld repair and final surface condition

Duplex stainless castings can work harden, and interrupted cuts across as-cast surfaces require rigid planning, suitable tooling and controlled stock. Drawings should identify datums, fits, sealing surfaces, bearing bores, threads, end preparation, finish, minimum wall and protected flow surfaces. Machining or grinding must not remove material below approved limits or conceal an unaccepted discontinuity.

Weld repair is a purchase-order decision. State whether repair is prohibited, purchaser-approved or permitted within defined limits. Where allowed, require qualified procedure and personnel, compatible filler, excavation mapping, heat input and interpass control, post-repair heat treatment when applicable, NDT and final dimensions. A wrought duplex welding guide is not automatically a casting-repair qualification.

Inspection and quality-document package

Inspection item RFQ definition Deliverable
Chemical composition ASTM edition/grade or complete customer limits; heat and any product analysis Traceable laboratory certificate including C and N.
Heat treatment Condition, furnace controls, quench and lot definition Cycle chart and heat-treatment certificate when ordered.
Mechanical properties Tensile/impact/hardness method, specimen basis and acceptance Signed results linked to heat and treatment lot.
Ferrite/intermetallic testing ASTM A800/A923 method, sampling, stage and acceptance Ferrite report, micrographs, impact or corrosion results as ordered.
Visual and dimensional Drawing revision, datums, CTQ dimensions, surface and sampling Dimensional and visual report.
PT/RT/UT or other NDT Method, procedure, coverage, stage, sensitivity and acceptance Reports, images where required and indication disposition.
Pressure/leak test Applicable code, medium, pressure, hold, temperature and safety Test certificate for approved pressure scope.
Traceability and repair Part/heat marking, repair map, deviations and record retention Manufacturing record book linked to supplied parts.

Chemical composition table for the RFQ

Use the current A890/A995 grade limits or an approved customer specification. Do not copy nominal wrought 2205 or 2507 values into the casting order without engineering review. The structure below keeps every important element visible and prevents a “high Cr, high Mo” shorthand from becoming an incomplete material definition.

Element, mass % Minimum Maximum Analysis basis Purchasing note
C Grade value Grade value Laboratory heat analysis; product analysis if ordered Do not rely on ordinary handheld XRF for carbon.
Cr Grade value Grade value Heat/product analysis State standard edition and exact cast grade.
Ni Grade value Grade value Heat/product analysis Review with nitrogen and ferrite balance.
Mo Grade value Grade value Heat/product analysis Higher value does not remove intermetallic-phase risk.
N Grade value Grade value Approved nitrogen analysis Report explicitly; do not infer.
Cu / W As grade requires As grade requires Heat/product analysis Grade-specific intentional additions.
Mn / Si As specified As specified Heat analysis Control melt practice and phase balance.
P / S – Specified maximum Heat analysis Include controlled residuals in the certificate.

RFQ checklist for duplex pump and valve castings

  1. Equipment, component, part number, controlled 2D drawing, 3D model and revision.
  2. ASTM A890/A890M-26 or A995/A995M-20 grade, or complete approved customer specification.
  3. General or pressure-containing scope, applicable design code and responsible design authority.
  4. Full fluid chemistry, concentration, pressure, temperature, velocity, solids, cycles and upset conditions.
  5. Sand or investment casting preference, quantity, tooling status and any mandated melting route.
  6. Heat treatment, ferrite range if applicable, ASTM A923 method and mechanical test requirements.
  7. Dimensions, datums, tolerances, surface finish, minimum wall, machining and balance requirements.
  8. NDT, pressure/leak tests, coverage, stage, acceptance references and personnel qualification.
  9. Weld-repair permission, approval route, repair map and reinspection.
  10. Traceability, certificate package, witness/hold points, packaging, quantity and destination.

Related products, process guides and factory pages

Current authoritative technical references

Technical and safety responsibility

The purchaser, equipment OEM or authorized engineer must approve material grade, corrosion compatibility, pressure/load design, casting route, heat treatment, ferrite/intermetallic test plan, repair, NDT, machining, installation and acceptance. EB Castworld does not promise corrosion immunity, pressure-code certification, service life, savings, delivery time, material equivalence or interchangeability without controlled requirements and supporting evidence.