Mill End Liners Supplier - EB Castworld %End Liners

Description

Ball Mill End Liners

Ball Mill End Liners for Chutes and Hopper, Shot Blast Machines, Chutes, Clinker Silo,Port Machinery and Ball Mills.
Product: End Liners
Minimum order quantity: 10 pieces
Delivery time: 7-25 days
Section Thickness is: 1 inch, 2″, 3″, 4″, 5″, 8″, 10″, 20″, 30″, 40″.
Material Grade is:
Cr-Mo Alloy Steel (ZG50Cr5Mo, ZG60Cr6Mo, Cr12Mo),
High Cr White Iron (BTMCr15Mo, BTMCr20Mo, BTMCr26Mo)
Plate Thickness is: 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 15mm, 30mm, 32mm, 40mm, 50mm, 60mm, 80mm, 100mm, 200mm, 500mm, 1000mm.

Our Photos for Ball Mill End Liners:

Mill End Liners Material Grades

Standard Specification for Cr-Mo Alloy Steel
Reference Standard	Nominal Chemical Composition (W%)
Reference Standard	C	Si	Mn	Cr	Mo	Ni	P	S
AS 2017/L2A	0.45-0.55	≤0.75	0.50-1.00	0.80-1.20	–	–	≤0.04	≤0.04
AS 2017/L2B	0.55-0.65	≤0.75	0.50-1.00	0.80-1.50	0.2-0.4	–	≤0.04	≤0.04
AS 2017/L2C	0.70-0.90	≤0.75	0.50-1.20	1.30-2.40	0.2-0.4	–	≤0.04	≤0.04
ZG42Cr2Si2MnMo	0.38-0.48	1.5-1.8	0.8-1.2	1.8-2.2	0.2-0.6	–	≤0.04	≤0.04
ZG45Cr2Mo	0.40-0.48	0.8-1.2	0.4-1.0	1.7-2.0	0.8-1.2	≤0.5	≤0.04	≤0.04
ZG30Cr5Mo	0.25-0.35	0.4-1.0	0.5-1.2	4.0-6.0	0.2-0.8	≤0.5	≤0.04	≤0.04
ZG40Cr5Mo(FED-4A)	0.35-0.45	0.4-1.0	0.5-1.2	4.0-6.0	0.2-0.8	≤0.5	≤0.04	≤0.04
ZG50Cr5Mo	0.45-0.55	0.4-1.0	0.5-1.2	4.0-6.0	0.2-0.8	≤0.5	≤0.04	≤0.04
ZG60Cr5Mo	0.55-0.65	0.4-1.0	0.5-1.2	4.0-6.0	0.2-0.8	≤0.5	≤0.04	≤0.04
FMU-29	0.25-0.45	0.3-1.0	0.6-1.5	6.0-8.0	0.2-0.4	–	≤0.04	≤0.04
FMU-11	0.90-1.30	0.3-1.0	0.6-1.5	11.0-13.0	0.3-0.5	–	≤0.04	≤0.04
FMU-13	0.80-1.30	0.4-1.2	0.8-1.5	11.0-13.0	0.4-0.8	–	≤0.04	≤0.04
FMU-14	1.60-2.00	0.4-1.2	0.8-1.5	11.0-13.0	0.6-1.0	–	≤0.04	≤0.04

Ni hard 1: ≥ HB500 G-X 330 NiCr 4 2 0.9625
Cast Iron Ni-hard 2: ≥ HB550 G-X 3260 NiCr 4 2 0.9620
White Iron Ni-hard 4: ≥ HB600, HB630 G-X 300 NiCrSi 9 5 2 0.9630

ISO 21988/JN/

HBW

S</