Description
Aluminum Stamping Castings
- Aluminum Stamping Castings is the original and most widely used method of forming aluminum into products.
- Technical advances have been made, but the principle remains the same: Molten aluminum is poured into a mold to duplicate a desired pattern.
- The most important methods are gravity casting, sand casting , permanent mold casting and die casting.
We’d like to help select suitable Aluminum Alloy Grade as per your specific working condition.
Our Photos ZL104 Aluminum Stamping Castings:
Nominal Chemical Composition (%)
| SO | GB | Si | Cu | Mg | Zn | Mn | Ti | Other | Al |
| ZAlSi7Mg | ZL101 | 6.5~7.5 | 0.25~0.45 | Bal. | |||||
| ZAlSi7MgA | ZL101A | 6.5~7.5 | 0.25~0.45 | 0.08~0.20 | Bal. | ||||
| ZAlSi12 | ZL102 | 10.0~13.0 | Bal. | ||||||
| ZAlSi9Mg | ZL104 | 8.0~10.5 | 0.17~0.35 | 0.2~0.5 | Bal. | ||||
| ZAlSi5Cu1Mg | ZL105 | 4.5~5.5 | 1.0~1.5 | 0.4~0.6 | Bal. | ||||
| ZAlSi5Cu1MgA | ZL105A | 4.5~5.5 | 1.0~1.5 | 0.4~0.55 | Bal. | ||||
| ZAlSi8Cu1Mg | ZL106 | 7.5~8.5 | 1.0~1.5 | 0.3~0.5 | 0.3~0.5 | 0.10~0.25 | Bal. | ||
| ZAlSi7Cu4 | ZL107 | 6.5~7.5 | 3.5~4.5 | Bal. | |||||
| ZAlSi12Cu2Mg1 | ZL108 | 11.0~13.0 | 1.0~2.0 | 0.4~1.0 | 0.3~0.9 | Bal. | |||
| ZAlSi12Cu1Mg | ZL109 | 11.0~13.0 | 0.5~1.5 | 0.8~1.3 | Ni:0.8~1.5 | Bal. | |||
| 1Ni1 | |||||||||
| ZAlSi5Cu6Mg | ZL110 | 4.0~6.0 | 5.0~8.0 | 0.2~0.5 | Bal. | ||||
| ZAlSi9Cu2Mg | ZL111 | 8.0~10.0 | 1.3~1.8 | 0.4~0.6 | 0.10~0.35 | 0.10~0.35 | Bal. | ||
| ZAlSi7Mg1A | ZL114A | 6.5~7.5 | 0.45~0.60 | 0.10~0.20 | Be:0.04~0.07 | Bal. | |||
| ZAlSi5Zn1Mg | ZL115 | 4.8~6.2 | 0.4~0.65 | 1.2~ | Sb:0.1~0.25 | Bal. | |||
| 1.8 | |||||||||
| ZAlSi8MgBe | ZL116 | 6.5~8.5 | 0.35~0.55 | 0.10~0.30 | Be:0.15~0.40 | Bal. | |||
| ZAlCu5Mn | ZL201 | 4.5~5.3 |