5000 Series 5005 5052 Aluminum Alloy Sheet Plate

  • Material Grade:5000 series aluminum alloy
  • Cast Process: Gravity Process
  • Pattern Process:Metal Dies
  • U.W.:0.5 – 300kg/piece
  • Surface Finish: Appro.Ra6.3 after machining


ZAlCu10 High precision Alu Cast Parts EB9090

5000 Series Aluminum Alloy Sheet Plate

5000 series aluminum alloy represent 5052, 5005, 5083, and 5A05 series. 5000 series aluminum  Alloy Sheet Plate belong to

the more commonly used alloy aluminum plate series. The main element is magnesium and the magnesium content is between 3-5%.

Also called aluminum-magnesium alloy. The main features are low density, high tensile strength, high elongation, and good fatigue strength,

but it can not be strengthened by heat treatment. Under the same area, the weight of aluminum-magnesium alloy is lower than other series.

It is also widely used in conventional industry.

Our Capability:

Heat Resistant


Heat-Treatment FixtureWear Resistance


Cement Mill Liner
Radiant TubeCoal Mill Liner
Furnace RollerMine Mill Liner
Cooler Plates For Cement PlantHigh Cr Casting
Spray NozzlesNi-Hard Casting
Melting Pot CastingsCr-Mo Alloy Steel Casting
Slag Pot CastingsHigh Mn Steel Casting


Centrifugal CastingsWear-Resistant Steel Plate
Bolts For Mills & CrushersChute Liner
Al & Copper ForgingsBall Mill Lining

Sag Mill Lining

High Alloy ForgingsCrusher Wear Parts
Ductile & Gray Iron CastingsCorrosion Resistant


Cobalt Alloy Castings
Special Alloy Surface Coating &

Overlay Weldings

Ni Alloy Castings
Heat-Treatment FurnacesStainless Steel Alloy
Drilling RigsNon-Ferrous Alloy (Al & Cu)

We can make Plate castings with Sand Cast Process, Investment Cast  Process, Gravity Cast Process and DIe

Cast Process.

Sand Cast Process

Gravity Cast Process

Investment Cast Process

Die Cast Process

Type of Aluminum Plate

5000 Series 5005 5052 Aluminum Alloy Sheet Plate Chemical Composition:
Al: balance
Silicon Si: ≤0.30
Copper Cu: ≤0.20
Magnesium Mg: 0.50 ~ 1.1
Zn: ≤0.25
Manganese Mn: ≤0.20
Cr: ≤0.10
Fe: 0.000 ~ 0.700
Note: Single: ≤0.05; Total: ≤0.15
5000 Series 5005 5052 Aluminum Alloy Sheet Plate Mechanical properties:
Tensile strength 155 ~ 195 (MPa)
Elongation ≥2 (%)
Conditional yield strength σ0.2 (MPa): ≥125
Note: Tensile mechanical properties of strip at room temperature
Sample size: strip thickness> 0.8 ~ 1.3

Our Photos for 5000 Series 5005 5052 Aluminum Alloy Sheet Plate:

5000 Series 5005 5052 Aluminum Alloy Sheet Plate

Our Experience:

  • 13 Year Experience in Heat-resistant Steel Field
  • 18 Year Expertise in Wear-resistant Material Field
  • 20 Year Customer-made High Quality Castings & Forgings

ZAlCu10 High precision Alu Cast Parts EB9090

1. 20-year Foundry Operation Experience.
2. Friendly & High Efficient Technical & Commercial Communication.
3. Professional Export Practices: Exported to +60 Overseas Countries.