Al-Si-Mg Alloy Composition in A356, ZL101 and ZL104 Gravity Cast Pump Housings

Drawing-based Al-Si-Mg gravity cast pump housings in A356, ZL101 or ZL104, with chemistry, process, inspection and RFQ controls.

Category:

Description

EB Castworld accepts drawing-based enquiries for Al-Si-Mg gravity cast pump housings, volutes, motor housings, end covers, impeller-related components and other industrial aluminum castings. Candidate alloy families may include A356.0, ZL101 or ZL104 when their chemistry, casting route, heat treatment and inspection plan match the purchaser’s design. The final material, dimensions, wall thickness, pressure boundary, machining, fixing, testing and acceptance criteria must follow the customer’s approved drawing and purchase specification.

This is not a stocked retail item and no universal alloy substitution is offered. A designation such as “A356,” “ZL101,” “ZL104” or “6061 aluminum casting” is not enough to release production. The RFQ must identify the governing standard and edition, temper or heat-treatment condition, service fluid, operating pressure and temperature, corrosion environment, critical-to-quality features, leak-test method and document package.

Product scope and engineering boundary

The product scope is a custom casting made to purchaser-controlled geometry and duty. Typical candidates include pump volutes, pump or compressor housings, motor end shields, bearing housings, fan or blower cases, fluid manifolds, covers and impeller-type parts. EB Castworld reviews the part family, quantity, tooling status and verification requirements before proposing gravity permanent-mold casting, gravity sand casting or another approved process.

Component family Essential drawing inputs Service inputs Customer approval boundary
Pump volute or housing Hydraulic passage, flange datums, bolt pattern, minimum wall, machining stock and pressure boundary Fluid, pressure, temperature, corrosion, solids and leak criterion Pump OEM approves hydraulic geometry, pressure design and test pressure.
Motor or bearing housing Bores, fits, concentricity, mounting faces, ribs, inserts and balance requirements Speed, bearing load, vibration, temperature and enclosure duty Equipment engineer approves fits, stiffness and rotating-system safety.
Cover, manifold or end cap Sealing land, threads, ports, wall transitions, flatness and fastener interface Fluid compatibility, torque, assembly sequence and maintenance Purchaser approves sealing system and pressure integrity.
Impeller-related casting Vane geometry, hub, blade thickness, machining, runout and balance class Speed, fluid, cavitation, erosion and allowable imbalance OEM retains responsibility for hydraulic design, overspeed and balance acceptance.
Machined aluminum pump volute used to review Al Si Mg alloy composition and gravity casting requirements
Existing EB Castworld media-library photograph of a machined aluminum volute. The photograph’s provenance was not independently re-established, including the original customer, project, heat number, casting route and exact alloy; the image is used only as a geometry and inspection reference.

Why Al-Si-Mg alloy composition matters

Aluminum provides the matrix, but silicon, magnesium, iron, copper, manganese, titanium and residual elements control how a casting fills, solidifies, heat treats, machines and resists service damage. Silicon generally improves fluidity and reduces solidification shrinkage relative to commercially pure aluminum. Magnesium enables precipitation hardening in controlled Al-Si-Mg systems. Iron-bearing intermetallics, copper additions, hydrogen and inclusions can change ductility, corrosion response, porosity risk and machinability.

More of one element is not automatically better. Increasing silicon may improve fill behavior while changing machinability and eutectic structure. Increasing magnesium can strengthen an appropriately heat-treated alloy but also narrows process control and cannot repair gas porosity or an unsuitable section transition. Manganese can influence iron-bearing intermetallic morphology, but it is not a substitute for limiting contamination and verifying the full heat analysis.

Element or constituent General role in Al-Si-Mg castings Risk or trade-off RFQ control
Silicon (Si) Supports castability, fluidity and the Al-Si eutectic system Structure, modification, cooling rate and amount affect ductility and machining Specify grade limits and casting process; do not order by nominal Si alone.
Magnesium (Mg) Supports precipitation hardening in heat-treatable Al-Si-Mg alloys Oxidation, fade, heat-treatment variation and excess phases require control State chemistry limits, temper, solution/age route and test-coupon basis.
Iron (Fe) Common impurity and process-related residual Iron-rich intermetallics may reduce ductility, especially with unfavorable morphology Set the applicable maximum and control incoming metal and revert practice.
Copper (Cu) Can influence strength and age response in selected alloy systems May reduce corrosion resistance and changes weld/heat-treatment behavior Do not assume A356, ZL101 and ZL104 permit the same Cu level.
Manganese (Mn) May alter iron-bearing intermetallic morphology; intentional in some grades Excess sludge-forming constituents or unapproved modification can impair casting Use the governing grade and supplier-approved melt window.
Titanium / grain refiners Used in controlled grain-refinement practice Fade, poisoning or excessive additions can make results inconsistent Define whether additions are permitted and how process control is recorded.
Hydrogen and inclusions Not alloying targets; melt-quality variables Can contribute to porosity, leakage and reduced fatigue performance Agree degassing, filtration, cleanliness and porosity verification.

A356.0, ZL101 and ZL104: comparison for quotation

A356.0 is commonly described within the AlSi7Mg0.3 family. Hydro’s formal foundry-alloy overview maps AlSi7Mg0.3 to EN AB-42100, A356.2 ingot and JIS AC4CH.2; that producer document is useful for family identification, not a universal finished-casting certificate. GB/T 1173-2013 is the current Chinese national standard for casting aluminum alloys and includes ZL101 and ZL104. ISO 3522:2007 remains current after its 2025 review and covers chemical-composition limits and separately cast test-bar properties for aluminum casting alloys.

The following values are procurement orientation only. The actual order must use the complete table and all impurity limits from the selected current standard. A356.0, ZL101 and ZL104 are not declared interchangeable merely because they share an Al-Si-Mg base.

Alloy designation Composition identity used for orientation Key distinction Release requirement
A356.0 / A356.2 metal source AlSi7Mg0.3 family; about 7% Si and about 0.3% Mg by designation North American designation system; casting specification and temper must be stated Current ASTM B108/B108M or B26/B26M as applicable, plus the full ordered chemistry and temper.
ZL101 / ZAlSi7Mg GB/T 1173 reference range: Si 6.5-7.5%, Mg 0.25-0.45%; other limits remain applicable Chinese grade with its own impurity and condition requirements Current GB/T 1173 table, casting standard, heat treatment and acceptance plan.
ZL104 / ZAlSi9Mg GB/T 1173 reference range: Si 8.0-10.5%, Mg 0.17-0.35%, Mn 0.2-0.5%; other limits remain applicable Higher-Si Al-Si-Mg-Mn family; not an automatic A356 or ZL101 substitute Current GB/T 1173 table, casting standard, condition and drawing-approved properties.

Do not order a “6061 aluminum casting” without review

6061 is widely specified for wrought products such as extrusions and structural profiles; ASTM B308/B308M, for example, covers extruded 6061-T6 standard structural profiles. It should not be copied into a gravity-casting drawing as if it were A356.0. If an RFQ says “6061 cast housing,” EB Castworld will request the functional reason, original product form and required properties. The purchaser must approve either a valid casting alloy and condition or a wrought-and-machined route. Keyword similarity is not metallurgical equivalence.

Gravity permanent-mold casting versus sand casting

ASTM B108/B108M-25 covers aluminum-alloy permanent-mold castings. The official scope notes that general-purpose requirements may not address every highly loaded or safety-critical application and that purchaser and producer should agree quality-assurance and process controls for nonregistered alloys. ASTM B26/B26M-25 similarly covers general-purpose aluminum-alloy sand castings and requires additional integrity and verification requirements where service is highly loaded or safety critical.

Process route Potential fit Primary controls Limit that must be accepted
Gravity permanent mold Repeat parts where metal tooling, directional cooling and consistent surfaces are justified Mold temperature, coating, fill, venting, feeding, cycle, inserts and ejection Tooling investment and geometry constraints; not every undercut or thick junction is suitable.
Gravity sand casting Larger housings, complex cores, lower quantities, development or geometry that favors sand tooling Pattern/core, sand system, gating, risers, chills, venting, knockout and cleaning Surface, tolerance and repeatability differ from permanent mold and require drawing allowances.
Low-pressure or pressure die casting Only after a separate capability and design review Pressure curve, die, vent/vacuum, cycle, trim and integrity plan “Die casting” is not a synonym for gravity casting and is not silently substituted.
Machined wrought route Selected parts where wrought properties, low volume or billet geometry control the decision Material certificate, stock orientation, machining, stress relief and waste Different cost, grain flow, available section and design rules from a casting.
Machined aluminum housings illustrating A356 ZL101 ZL104 gravity casting and leak path review
Existing EB Castworld media-library photograph of machined aluminum housings. Appearance alone cannot verify A356, ZL101, ZL104, heat treatment, leak tightness or a customer project; these require drawing-linked records and inspection.

Geometry, cores, wall thickness and fixing method

A pump housing combines hydraulic passages, flange faces, bearing or seal interfaces, ribs, bosses and fastener locations. Abrupt heavy-to-thin transitions can create hot spots and feeding difficulty. Long core spans may move or generate dimensional variation. The quotation drawing should identify cast datums, machined datums, minimum finished wall, casting draft, radii, core prints, machining stock and zones where no weld repair or impregnation is permitted.

Fixing and assembly details require equal attention. Specify threaded inserts, cast-in hardware, dowels, studs, bolt torque, gasket land, O-ring groove and sealing compound restrictions. Galvanic couples between aluminum and steel or copper-alloy hardware must be evaluated by the equipment designer for the real electrolyte and coating system. EB Castworld does not select a corrosion-control design from the alloy name alone.

Melt preparation, hydrogen and inclusion control

The charge plan, furnace practice, transfer, fluxing, degassing, filtration, temperature and holding time affect cast integrity. Aluminum can dissolve hydrogen in the liquid state; gas evolution during solidification can contribute to porosity. Oxide films or entrained inclusions may also create leak or fatigue initiation sites. A clean-looking machined surface does not prove a pore-free pressure boundary.

The RFQ should state whether a reduced-pressure test, density-index control, filter requirement, melt sample or other purchaser-approved process evidence is required. Acceptance values must be linked to a qualified process and the specific component. EB Castworld will not invent a melt-quality threshold without the customer’s service and drawing requirements.

Heat treatment and mechanical-property boundary

Al-Si-Mg casting alloys may be supplied in as-cast, naturally aged or artificially aged conditions, and selected grades may use solution treatment, quenching and aging. The condition affects strength, ductility, dimensional stability, residual stress and machining behavior. “T6” is therefore not a decorative suffix. The order must specify the governing definition, furnace/load qualification, solution temperature window, transfer and quench control, artificial-aging cycle and whether straightening is permitted.

Separately cast test bars can differ from the actual housing because section size, feeding, cooling rate and defect population are different. ASTM B108/B108M explicitly distinguishes separately cast specimens and tests taken from castings. The purchaser should state whether properties apply to separately cast coupons, integrally cast coupons or specimens removed from a defined casting location. No mechanical property or fatigue life is guaranteed from a generic online table.

Chemical analysis and material traceability

ASTM E1251-24 describes spark atomic-emission spectrometric analysis of aluminum and aluminum alloys. A valid result depends on representative sampling, surface preparation, calibration, reference materials and the laboratory’s method capability. Handheld XRF may support screening for selected elements but is not automatically the contractual release method for every light element or narrow limit.

Control point Evidence Traceability link Important limitation
Incoming alloy or master alloy Supplier certificate and receiving identity Batch/lot to melt record A supplier certificate does not replace foundry heat analysis when the order requires it.
Heat chemistry Spark-AES or approved laboratory method Melt/heat number to casting marks Sample must represent the poured metal and include all specified elements.
Product verification Product analysis or PMI when ordered Defined location on casting or test coupon Surface coating, oxide, curvature and local segregation can affect readings.
Heat treatment Furnace chart, load ID and procedure revision Heat-treatment lot to casting Set point alone does not prove part temperature or quench transfer.
Final certificate Chemistry, condition, inspection and deviations Purchase order and drawing revision Generic certificates without part identity are not sufficient.

Porosity, leak testing and NDT

Porosity acceptance must match function and inspection method. ISO 10049:2019 specifies a visual method for assessing porosity on machined surfaces of aluminum alloy castings and explicitly does not apply to porosity shown on radiograms. A radiographic class, machined-surface porosity level, pressure decay limit, hydrostatic test or helium test are separate requirements and cannot be substituted without approval.

For a pump housing, state the test fluid or gas, pressure, hold time, stabilization, temperature, allowable leakage, safety controls and whether testing occurs before or after machining and impregnation. Pneumatic testing stores energy and requires a purchaser-approved safe procedure. Penetrant testing can reveal surface-breaking discontinuities but does not prove internal soundness. Radiography coverage and acceptance must identify critical zones and drawing orientation.

Inspection objective Method RFQ definition Deliverable
External condition Visual inspection Surface standard, flash/fin removal, prohibited indications and sample plan Signed visual record and deviation disposition.
Machined-surface porosity ISO 10049 method when contractually selected Reference level, evaluation area and machining stage Location-linked assessment; not a radiographic result.
Internal soundness Radiography or another approved method Zones, views, sensitivity, reference and acceptance Report/images and disposition of indications.
Leak tightness Hydrostatic, pressure-decay or approved leak method Medium, pressure, time, temperature, allowable leak and safety Part-linked test record.
Dimensions CMM, gauges, fixtures and manual measurement Datums, CTQs, sample rate and condition First-article and production inspection report.
As cast aluminum impeller geometry for silicon magnesium manganese chemistry and feeding review
Existing EB Castworld media-library photograph of as-cast aluminum impeller geometry. Its exact chemistry, process history, customer and service duty cannot be established from the photograph and are not claimed on this page.

Machining, impregnation, welding and surface treatment

Machining can expose subsurface pores or distortion that was not visible in the as-cast state. The drawing should define datum sequence, rough and finish machining, inspection between operations, minimum final wall, thread class, sealing-face finish and burr control. If a pressure boundary is machined by the customer, both parties should agree how newly exposed porosity is evaluated.

Vacuum impregnation, welding, peening and blending are repair or process options only when the purchase specification permits them. Approval must state eligible zones, limits, procedure, identification and reinspection. A sealed pore does not change the underlying alloy chemistry or make an unsuitable structure acceptable. Welding can alter the heat-treated condition and corrosion response; filler, heat input and post-weld requirements need engineering approval.

Surface treatments such as conversion coating, anodizing, painting or powder coating require alloy, surface-preparation, masking and dimensional review. The purchaser should specify coating system, thickness, color, adhesion/corrosion test and protected sealing or bearing surfaces. EB Castworld does not claim a generic coating is suitable for food, potable water, explosive atmosphere or seawater without the relevant specification.

Quality documents available for the order

The exact documentation package is agreed before quotation and may include drawing-revision confirmation, process flow, inspection and test plan, supplier certificate, heat analysis, heat-treatment chart, first-article dimensional report, NDT report, leak-test record, repair map, coating certificate, packing list and part-to-heat traceability. Capability and document availability must be confirmed for the specific component rather than inferred from this page.

RFQ checklist for Al-Si-Mg gravity cast housings

  1. 2D drawing and 3D model with revision, units, datums and critical-to-quality features.
  2. Component name, equipment model and whether the part is a pressure or rotating safety boundary.
  3. Selected A356.0, ZL101, ZL104 or alternative grade with current governing standard and full chemistry.
  4. Required as-cast or heat-treated condition and the property/test-coupon basis.
  5. Permanent-mold or sand-casting preference, annual quantity, lot size and tooling ownership.
  6. Service fluid, pressure, temperature, corrosion, solids, cavitation, vibration and design life criteria.
  7. Minimum finished wall, machining stock, sealing faces, bores, threads, inserts and coating masks.
  8. Visual, dimensional, radiographic, penetrant, porosity and leak-test requirements with acceptance.
  9. Repair and impregnation permissions, prohibited zones, approval hold points and reinspection.
  10. Part marking, heat/lot traceability, certificate format and record-retention period.
  11. Quantity, destination, packaging and handling restrictions; no stock or lead time is assumed.
  12. Customer-approved drawing and deviation disposition before production release.

Related aluminum casting and engineering pages

Current authoritative references

Technical and safety responsibility

The purchaser, pump or equipment OEM, and authorized engineer remain responsible for material selection, pressure and rotating design, hydraulic performance, corrosion allowance, casting route, heat treatment, inspection, repair permission, leak test, balance, coating, installation and retirement criteria. EB Castworld does not promise pressure rating, fatigue life, corrosion immunity, leak-free service, performance improvement, savings, stock or delivery time without drawing-specific engineering, qualification and contractual acceptance.