Ball Mills Advantages
Ball Mills with different specifications and sizes can be made to meet the requirements of various production capacities.
The output per hour ranges from several hundred grams to two to three hundred tons, especially for continuous production with high production capacity, which can meet modern large-scale industries. Production needs.
The pulverization ratio can reach more than 300, it is easy to adjust the product fineness, the product size is uniform, and the mixing effect is also good.
Strong adaptability. It can work under various conditions. Can be produced by dry method or wet method. It can also carry out drying and grinding together at the same time.
Simple and sturdy structure Simple and sturdy structure, reliable operation, convenient maintenance and management, and long-term continuous operation.
Good airtightness. There is a good airtight device to prevent dust from flying.
There is a good airtight device to prevent dust from flying
Disadvantages of ball mills
- Low work efficiency:
The energy utilization rate is low, the effective utilization rate is only 2%, and most of the rest is converted to heat and sound energy. The power consumption per ton of cement is not less than 70kW.h.
Total weight of large-scale mills can reach more than several hundred tons, so the one-time investment is very large.
- Low speed:
The mill speed is low (15-30r/min), if it is driven by an ordinary motor, it needs to be equipped with an expensive deceleration device.
- Consumption and loud noise:
Consumption of grinding body and liner is very large: each ton of cement consumes about 1kg of steel; the operation is noisy.
The influence of the grinding particle size on the ball mills:
Particle size of the material to be milled has a great impact on the quality and power consumption of the mill. With small particle size and uniform feeding, it is easy to grind.
The output and quality of the mill are also high, and the power consumption is also low.
On the contrary, the large particle size and uneven feeding make it difficult to grind, the quality of the mill is low, and the power consumption is also large.
Therefore, the smaller the particle size of the mill, the better the quality of the mill, but the reduction of the particle size of the mill material will be limited by the equipment conditions.
Q: Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: What kinds of products do you offer?
A: We mainly produce various high alloy steel castings, such as mill liners, jaw crusher spare parts, jaw plates, cone crusher spare parts, Crusher Blow Bars, Crusher Hammers, etc.
Q: What kind of materials are using for the products?
A: We supply all kinds of high alloy steel castings, including manganese steel castings, high manganese steel, nickel hard castings, chromium molybdenum alloy steel, high chromium white iron castings, etc.
Q: What is the maximum weight of a single piece that can be cast, and what is your daily processing capacity?
A: The weight of a single piece that can be cast at one time is 30 tons. The production capacity is 150 tons/working day.
Q: What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q: What is the Warranty for our products ?
A: If any quality problems on our side occurred in this period , we will take on the shipping cost and replacement.
Q: What is the delivery time of your products?
A: It depends on the inventory availability.If items needed are in stock, the delivery time would be within 7 work days, but if not the delivery time would be around 30 work days.
We will send working schedule of your order each week.
The detailed inspection picturesion by email.
Eternal Bliss Alloy Casting & Forging Co, Ltd.
Our What’s app: 0086-130 930 23772